Working 40% more power efficiency up to 25 amps and a source of high end performance exhibitions. Precision TIG 375, pulse and power factor correction as standard equipment is equipped with features.

Advantages:
Low current (DC at 2 amps, AC at 5 amps) source for the start of the patented Micro-Start ™ technology. Precision TIG source for the performance is soft, can be controlled, focused arc.

Cable connections and ease of use TORC design. With removable shelf for supplies TORC and storage compartment is inserted into the machine. Pulse with pulse control and resources developed during the end of the arc extinguished be slow source (crater filling) with each other above the synchronization.

With the help of standard power factor correction capacitors, high current power consumption savings are made in the source. Simple and easy to use controls. Energy efficiency is high design. The possibility of making type elektrode source E6010 and the E7018. High efficiency and reliable ProCon ® pump, engine water cooling unit integrated into the body.

Chassis cable, electrode holder, and separate output sockets pense. TIG welding process between the electrode covered with the possibility of fast switching. Tries to make the machine easily accessible for easy connection board. Reliable, robust polarity (polar) to change the key. Minimum output for use with control before setting the minimum flow can be the source.

Even when using a thick source of diameter tungsten tip the possibility of an easy beginning. Welders, the foot pedal with the minimum and maximum flow control can help with. Needs Until Fan (FAN – Fan as needed), the principle of electronic parts and equipment in the machine on to minimize the thermal cycle. In this way, resources are not made in time, minimize pollution and save electricity consumption is provided. Circuit automatically flow into auxiliary jack. In this way, water cooling unit runs only when needed. 3 year parts and labor warranty.

Front Panel Components:
(1) Power switch, (2) Polarity (polarity) switch, (3) Source mode switch, (4) AC balancing switch, (5) Remote control switch current setting, (6) Maximum current settings button (the source before the current adjustment allows), (7) Minimum flow switch and the indicator switch (source before the current set of possibilities, and also shows the output voltage), (8) Digital indicator (9) Resources gas flow after the time switch, (10) thermal protection / shutdown lamp, (11) Remote control jack (made), (12) Trigger switch
(2 / 4 trigger), (13) Pals mode switch, (14) Pals frequency (frequency) slider, (15) percent of the time according to the pulse switch, (16) Pals lower flow switch, (17) Source current setting of the end button (crater).

Related posts:

1. Lincoln Electric Precision Tig 225 Welder w/ Ready Pak K2535-1
2. VANTAGE 500 CE Welding Generator
3. Miller Tig Welder Industrial Equipment Machine